University College: Penn State New Kensington (2 BET)
PROFESSOR JOIE MARHEFKA, Program Coordinator, Penn State New Kensington
PROFESSOR IVAN E. ESPARRAGOZA, Director of Engineering Technology and Commonwealth Engineering, Penn State Brandywine
PROFESSOR SVEN BILÉN, Head, School of Engineering Design, Technology, and Professional Programs, Penn State University Park
The medical community has grown to depend on medical devices and systems to diagnose, treat and monitor patients in health care. These medical devices have become very complex systems, as they are becoming microprocessor controlled, PC based, and networked to share information. Biomedical Equipment Technicians (BETs) are specialized individuals who are educated and trained on the methods of: physiological measurement; equipment application and operation; safety, performance and preventive maintenance testing; calibration; problem solving; and troubleshooting. In addition, BETs may be involved in equipment and technology management programs, selection and installation of medical equipment, manufacturer and FDA recalls of medical devices, quality improvement programs, and training programs for hospital personnel in the safe and proper use of medical equipment. The classroom and laboratory portions of this major focus on electronically and PC based medical devices for patient monitoring and life-support equipment. The student is exposed to a much broader spectrum of medical equipment through a 400-hour (ten-week) practical internship in an approved health care facility.
Program Educational Objectives
The BET major prepares graduates who, during the first few years of professional practice, will be able to:
Program Outcomes (Student Outcomes)
The BET program outcomes are as follows:
1. Understand use, application, operation, installation, acceptance testing, preventive maintenance, performance assurance and safety inspections (PMs) on select medical devices.
2. Understand and apply a fundamental knowledge of electrical and electronic engineering technology fundamentals, components, circuits and networking fundamentals.
3. Apply basic mathematical and scientific principles to identify, analyze and solve technical problems.
4. Be aware of and understand diversity, professional and ethical responsibilities, applicable standards and regulations regarding medical equipment support.
5. Work with fellow technicians, clinical professionals and other related professionals by functioning effectively on teams and by independent work.
6. Communicate effectively with fellow technicians, clinical professionals and other related professionals.
7. Recognize and understand the need for continued professional development, including formal and informal study.
8. Recognize, observe and participate when possible in quality improvement programs, timeliness and commitment to continuous improvement that support medical equipment and systems.
Students completing the 2 BET degree need only complete several additional courses to obtain the Associate in Engineering Technology degree in Electrical Engineering Technology. Graduates of the program may qualify for admission to the baccalaureate degree major in Electrical Engineering Technology offered at Penn State Harrisburg, Electrical and Computer Engineering Technology offered at Penn State Erie, and Electro-Mechanical Engineering Technology offered at Penn State Altoona, Berks, New Kensington and York.
ENTRANCE REQUIREMENTS: Students must have a minimum 2.0 GPA to change to this Associate degree after admission to the University.
For the Associate in Engineering Technology degree in Biomedical Engineering Technology, a minimum of 71 credits is required. This program is accredited by the Engineering Technology Accreditation Commission of ABET, www.abet.org.
Scheduling Recommendation by Semester Standing given like (Sem: 1-2)
GENERAL EDUCATION: 21 credits
(12 of these 21 credits are included in the REQUIREMENTS FOR THE MAJOR) (See description of General Education in front of Bulletin.)
REQUIREMENTS FOR THE MAJOR: 62-63 credits
(This includes 12 credits of General Education courses: 3 credits of GN courses; 3 credits of GQ courses; 6 credits of GWS courses.)
PRESCRIBED COURSES (47 credits)
BE_T 101(1), CHEM 101 GN(3), EET 105(3), CMPET 117(3), CMPET 120(1), ENGL 015 GWS(3), IST 110 GS(3), IST 220(3) (Sem: 1-2)
BE_T 201(5), BE_T 204(5), BE_T 205(4), CAS 100 GWS(3), PHYS 150 GN(3), RADSC 230(3) (Sem: 3-4)
BE_T 203 (4) (Sem: 5)
ADDITIONAL COURSES (15-16 credits)
MATH 022 GQ(3) and MATH 026 GQ(3) or MATH 040 GQ(5) (Sem: 1-2)
BE_T 202(4) or BE_T 206(4) (Sem: 3-4)
BISC 004 GN(3) or BIOL 141 GN(3) (Sem: 3-4)
Select 3 credits from the following technical courses: BE_T 210(3), BE_T 296(1-18), BE_T 297(1-9), BIOL 129 GN(4), CMPET 211(3), CMPSC 101 GQ(3), EDSGN 100(3), EET 213(5), EET 297(1-3), EGT 201(2) or MCHT 111(3) (Sem: 3-4)
 A student enrolled in this major must receive a grade of C or better, as specified in Senate Policy 82-44.
 BE T 203(4) Internship must be the last course taken for the degree.
Last Revised by the Department: Summer Semester 2017
Blue Sheet Item #: 45-04-048A
Review Date: 01/10/2017
UCA Revision #1: 8/2/06
UCA Revision #2: 7/26/07